Main page

AEG

Nozzle AEG Duralumin H+PTFE

Nozzle for AEG H+PTFE - more than 50 various lengths in the assortment.

AEG

Nozzle AEG Duralumin NiPTFE

Duralumin NiPTFE AEG nozzle. New generation of EPeS nozzles. Same design, even better surface treatment.

AEG

SorboPad for AEG

SorboPad for AEG Cylinder Head in four various thicknesses and three hardnesses. 1mm thickness PU covering and 3M 200MP self-adhesive included.

AEG

Gearbox washers AEG

Gearbox washers for AEG - 0,1, 0,2, 0,3 and 0,5mm.

AEG

Cylinder head AEG Mk.III uni V2/3 – standard

A revolutionary cylinder head for V2 and V3 gearboxes. Our unique design solution brings a new standard of quality and performance. Affixing the cylinder head inside the gearbox prevents undesired movements during fire. The innovative design allows for a longer stroke of the tappet plate for maximum performance and reliability of your AEG weapon.The combination of uncompromising manufacturing...

AEG

Piston head AEG POM (plastic)

A very lightweight AEG piston head designed with 2 O-rings and 11 counter-pressure holes. Made from high quality POM-C plastic. The piston head uses a steel axial ball bearing for smooth operation. The combination of well thought-out design and the material used ensures perfect performance and long lifetime on springs with up to SP150 power. The piston head’s low weight helps to prolong the...

AEG

Piston head AEG Duralumin H+PTFE

An uncompromising piston head for perfect performance even with the strongest springs. Designed with 2 O-rings and 11 counter-pressure holes. Thanks to the aircraft duralumin used in its construction, this piston head can be used even with the strongest springs. The H+PTFE surface finish provides long lifetime and low friction.

AEG

AOE spacer pad AEG piston head

A spacer pad for piston head AOE correction – available in 3 different thickness options – 0.5/1/2 mm.

AEG

Cylinder head AEG Mk.III uni V2/3 – standard – EF

A revolutionary cylinder head for V2 and V3 gearboxes. Our unique design solution brings a new standard of quality and performance. Affixing the cylinder head inside the gearbox prevents undesired movements during fire. The innovative design allows for a longer stroke of the tappet plate for maximum performance and reliability of your AEG weapon.The combination of uncompromising manufacturing...

AEG

PU impact pad AEG uni cylinder head

Rubber impact pad for AEG cylinder head in various thicknesses and hardnesses. Perfect for AOE correction.

HPA

HPA S&F hose

A soft and flexible (S&F) hose available in 80/100/115 cm length, with braided cover in many colors. The super-flexible HPA hose is designed for the player's maximum comfort. Special multi-layered design keeps high airflow even when the hose is bent to sharp angles. Premium materials ensure longevity even in demanding conditions. High quality braided cover in different colors increases...

GBB HPA

HPA adaptor for GBB SC (Self Closing)

A new type of the popular HPA adapter, available in various versions with threads that are compatible with WE/KJW/VFC/GHK/ProWin, KWA/KSC, TM/TW or with standard M6 thread (GE M870 compatible). Compatible with US Foster Series 2 quick couplers, which is the most common global standard. Allows the connection of HPA systems to GBB guns. The SC version has a one-way valve that keeps pressure...

Dummy suppressor inserts for airsoft Mk.III

Dummy suppressor inserts for airsoft

AEG

Spacer washer for hop-up rubber lip AEG - SET

A spacer sleeve for the lip of a hop-up rubber bucking (set of 2 pcs in 0.1 mm thickness and 2 pcs in 0.1 mm thickness). This spacer is used to shorten the effective length of the bucking’s lip.

AEG

O-ring set for AEG hop-up chamber

Set of O-rings for pushing the hop-up chamber onto the gearbox or fixing the hop-up control elements.

HPA

Max Flow HPA low pressure regulator

Max Flow HPA Low Pressure Regulator

EPES blasters

HS Projectiles - 0.68 - PB40

The best feed for the PB40 system in the world. Moreover, just like EPES's PB40, it is made in the Czech Republic.

GBB HPA

HPA adaptor for GBB Mk.II

A new type of the popular HPA adapter. Allows the connection of HPA systems to GBB guns. Available in various versions with threads that are compatible WE/KJW/VFC/GHK/ProWin, KWA/KSC, TM/TW or standard M6 thread (GE M870 compatible). Compatible with US Foster Series 2 QD couplers, which is the most common global standard. Mk.II has several small improvements over Mk.I and, newly, it also has a...

AEG

Spacer washer hop-up chamber / gearbox – 0,1 mm

A set of spacer washers between hop-up chamber and gearbox. Very useful if the nozzle needs to be shortened slightly. No need to disassemble the gearbox - just insert the required number of washers between the gearbox and hop-up chamber.

AEG

Liquid thread locker / sealant (1 ml)

Thread locking glue in 1ml syringe. Available in low/medium/high strength.

GBB

Spare seal kit GBB output valve (GG)

Gasket set for outlet valves of WE and GHK gas magazines.

AEG

PU pad/Sorbo sticker uni AEG cylinder head (3pcs)

Spare universal glue-sticker for Sorbopad or impact pad installation to AEG cylinder head.

AEG

AEG piston weight gain set

AEG piston weight gain set. Suitable for DMR and similar builds where higher power (2J+) and heavier ammunition (0.36g BB+) is expected. It is also a prerequisite to have enough air in the cylinder in proportion to the barrel length.

GBB HPA

HPA adaptor reduction for GHK GBB magazine

The reduction for the combination of GHK GBB magazines and EPeS HPA adaptors. The reduction is made with M5 thread - so it is compatible with any WE/KJW type of HPA adaptor.

AEG

AOE spacer pad AEG piston weight gain

Special heavier spacer pad for piston head AOE correction and piston load correction - available in 0.5/1/2 mm thicknesses.

SPRING ACTION

SorboPad VSR (22 mm cylinder)

Sorbopad for VSR and similar type Spring Action Sniper Rifles with 22 mm cylinder. 1 mm PU covering and 3M 200MP PSA for easy application included.

AEG

M249 hop-up chamber

A high-end hop-up chamber for the M249 SAW that will give your gun maximum performance and precision. Our unique chamber design uses the standard AEG hop-up bucking but provides flawless construction and many upgrades at the same time. Thanks to all these features, our chamber delivers top performance, reliability and user comfort so that you can get the maximum out of your gun. Precisely made...

HPA

Max Flow Tournament Lock – 3D printed

Tournament Lock for Max Flow in the standard form of a cap in orange or black colour. Made by 3D print technology.

EPES blasters

Magazine Mid-Cap AR15 DMAG plastic 120BB - DA

Zásobník tlačák AR15 DMAG plast 120BB - DA

GBB

Spare seal kit GBB filling valve

Set of outer or inner O-rings for gas magazine filling valves.

SPRING ACTION

SorboPad L96/M24 (20 mm cylinder)

Sorbopad for L96/M24 and similar type Spring Action Sniper Rifles with 20 mm cylinder. 1 mm PU covering and 3M 200MP PSA for easy application included.

AEG

Screw kit for gearbox V2

Set of hight quality screws for gearbox V2 - Philips, Hex or Torx.

AEG

Hop-up pressure roller 2,5 and 3 mm – uni 70sh

A rubber round bar for the manufacturing of precise pressure rollers for hop-up, in 2.5 and 3 mm diameters.

EPES blasters

Li-Pol Battery 3S 11V 1500mAh 25C - Gens Ace

Gens ace 25C 1500mAh 3S1P 11,1V Lipo baterie s konektorem DeanT je navržena speciálně pro napájení airsoftové zbraně. Vhodná pro repliky typu AR s baterií umístěnou v tubusu pažby a AEG, kde je menší prostor pro baterii.

HPA

HPA gauge – 1/8NPT

A pressure gauge for HPA systems, available in ranges 150/200/250/300 psi. It has 1/8 NPT external thread.

Silicon grease (5 ml)

Silicone grease - gentle on rubbers and other sealing materials

HPA

HPA 6 mm straight coupling

HPA 6 mm hose coupling with female M6 and 1/8 NPT or male 1/8 NPT thread.

PTFE grease (5 ml)

PTFE grease for gears and similar applications.

HPA

HPA low-pressure hoose – 1m

HPA low-pressure hoose in 4 an 6mm diameter and 1 m length. Maximal working pressure 300psi.

AEG

Screws for AR15 grip AEG

Screw set for AR15 grip AEG. Hex washer screw - 4pcs in 8 and 10 mm length. Hex key included.

GBB

Spare seal kit GBB magazine body

Set of gaskets for Glock, M9 and AR15 WE GBB magazine bodies.

AEG

Spare seal kit for AEG piston head

Set of O-rings for AEG piston head in three variants - standard, thicker and NBU

HPA

Tournament Lock Sticker for Max Flow – 5pcs

Tournament Lock Sticker for Max Flow - 5pcs

AEG

Nozzle AEG Duralumin H+PTFE – BREN ASG

Nozzle with one O-ring specially designed for AEG ASG made BREN. Available in Standard (341mm) and Extended (351mm) version.

AEG

Cylinder head AEG Mk.II uni V2/3 – long – EF

A revolutionary cylinder head for V2, V2.5 and V3 gearboxes. Our unique design solution brings a new standard of quality and performance. Affixing the cylinder head inside the gearbox prevents undesired movements during fire. The innovative design allows for a longer stroke of the tappet plate for maximum performance and reliability of your AEG weapon.The combination of uncompromising...

HPA

HPA QD plug (Foster)

HPA QD plug (Foster) with male or female 1/8 NPT

HPA

Spare outer seal kit for HPA tanks

A spare outer gasket for threaded output of an HPA tank.

AEG

Nozzle AEG Duralumin H+PTFE – EVOIII ASG

Nozzle with one O-ring specially designed for AEG ASG made EVO III. Available in standard version with flat edge end, or with sharp edge end version - same shape known in classic EPeS AEG nozzles.

AEG

Bearing AEG piston head / spring guide

Bearing for piston head or spring guide

PTFE tape

PTFE tape for additional sealing of threads or hop-up mechanism and other applications