EPESní EAR-10 (SR25) CNC body – Mlok 13" – Černá

Our EAR-10 is available in only two levels – the best ones for AEG and HPA!

Level 3.5 General

• Full CNC machined body made from a block of 7075 T6 aircraft-grade aluminum Retro Arms - the most durable body on the market with absolutely perfect fit and very low weight
• Duralumin CNC skeleton of the V2.5 Retro Arms gearbox, which can withstand even the strongest springs
• CNC steel spring guide pin Retro Arms
• SHS/Shooter/Solink heavy-duty steel wheels (these are the same wheels, only distributed differently) with a gear ratio of 18:1 / 16:1
• Low-profile steel sliding 8mm bearings Retro Arms
• Retro Arms piston for V2.5 gearbox with steel rack and short stroke modification
• We use springs from manufacturers such as Guarder, ASparts, Ultimate, ActionArmy, SuperShooter - depending on the exact performance specifications from the customer.
• POM-C piston insert for use with standard AEG springs (no need to use PSG springs)
• Modified CNC POM-C Retro Arms feeder arm
• Perun V2 Hybrid PRO processor unit allowing a wide range of settings (firing modes, battery monitoring, pre-tensioning, etc.) with high-quality 1.5 mm² cross-section cabling and silicone insulation, supplemented with a DeanT connector leading to the stock
• EPES Air system consisting of an EPES nozzle, cylinder head with 70sh PU stop on the cylinder head for AOE correction, and EPES duralumin piston head.
• Pressurized hop-up chamber on the gearbox (eliminates problems with chamber bounce and power fluctuations)
• Maple Leaf Super Macaron 60sh hop-up rubber for stable ball hopping at both low and high power settings
• Enlarger mounted on a piston wheel to increase the stroke of the arm
• Maple Leaf 6.02 mm barrel including machined centering grooves for rings to eliminate play in the outer barrel (limiting play in the inner barrel significantly increases the accuracy of the weapon)
• Complete CNC HopUp chamber MaxxPro (precise hopup pressure control including shaped pressure segment, ball catch in the shaft - when reloading the magazine, the balls do not fall out of the feed shaft, but can be released using a button before storing the weapon)
• Solink-PRO 34k high-torque brushless motor in collaboration with EPES Airsoft.

Level HPA Admiral

• Full CNC machined body made from a block of 7075 T6 aircraft-grade aluminum Retro Arms - the most durable body on the market with absolutely perfect fit and very low weight
• F2 Polarstar engine
• Complete CNC HopUp chamber MaxxPro (precise hopup pressure control including shaped pressure segment, ball catch in the shaft - when reloading the magazine, the balls do not fall out of the feed shaft, but can be released using a button before storing the weapon)
• Power up to 4 J (depending on barrel length).

General weapon parameters:

• weight of the weapon alone 2.45 kg
• Length of weapon with stock retracted and extended: 800/882 mm
• inner barrel length 370 mm
• Mlok 13" rail
• The package contains a gun and a magazine for 120 BBs.
• Medium EPES gun case

Product video: